1. Investigating the effects of loading rate and mixing design on concrete's direct tensile strength using the ctlc test

Manouchehr Sanei, Mohammad Fatehi, Din Mohammad Yusufi, Mohammad Davood Yavari (2026), Journal of analytical and numerical methods in mining engineering , 15(45), 63-74 (No: 34920)

3. Numerical simulation of appropriate design for selecting tunnel support systems in squeezing grounds (tunnel no. 2 in tabas coal mine, iran)

Mahdis Shekar chi zadeh, Mehdi Najafi, Mohammad Fatehi (2025), Advances in civil engineering , 2025(1), 1-17 (No: 33443)

4. A finite element analysis of the effects of tadas dampers on the frame members' performances in concrete structures under cyclic and monotonic loadings

Hadi Haeri, Ahmad Guodarzi Talehjerdi, Vahab Sarfarazi, Ali Moayer, Mohammad Fatehi (2025), Iranian journal of science and technology-transactions of civil engineering , (49), 1133-1156 (No: 33781) (10.1007/s40996-024-01540-4)

5. Investigation of the shear mechanism at the interface between grout and brittle rock: physical testing and pfc3d simulation

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Negin Rafiei, Amir Abbas Amiri, Mohammad Fatehi (2025), International journal for numerical and analytical methods in geomechanics , 49(), 1491-1505 (No: 33782) (10.1002/nag.3944)

6. Numerical simulation of the stress effects on the cavity growth process in ucg considering two random parallel coal cleats

Mohammadreza Shahbazi, Mehdi Najafi, Mohammad Fatehi, Abolfazl Abdollahipour (2025), Fatigue and fracture of engineering materials and structures , 2025(1), 1-15 (No: 34237) (10.1111/ffe.70087)

7. Simultaneous effects of geometry, lithology, slope angle, and groundwater level on the slope stability of open pit mines (case study of golgohar iron ore mine, sirjan, iran)

Mohammad Shekari Nejad, Mohammad Fatehi, Manouchehr Sanei (2025), Journal of mining and environment , 1(1), 1-19 (No: 34921)

8. A coupled empirical-numerical method for open-stope stability analysis considering stope dimensions

HASAN MOHAMADI, Mohammad Fatehi, Seyed Mohammad Esmaeil Jalali, Ali Dabagh (2025), International journal of mining and geo-engineering , 59(4), 333-340 (No: 35146)

9. The effect of bedding plane on the hydraulic fracture growth in gas shale reservoirs: analytical solution

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Fariborz Matinpoor,, shadman mohammadi bolbanabad, Shirin Jahanmiri, Mohammad Fatehi (2025), Geomechanics and engineering , 43(4), 281-299 (No: 35151)

10. An examination of stress wave blasts deflection in materials that resemble rocks with soft and hard interlayers

Mojtaba Pourali, Vahab Sarfarazi, Hesam Dehghani, Hadi Haeri, Jinwei Fu, Shirin Jahanmiri, Mohammad Fatehi (2025), Geomechanics and engineering , 42(), 347-372 (No: 35152) (10.12989/gae.2025.42.5.347)

11. Investigation of failure mechanism of geogrid reinforced porous concrete based on experimental test

Jinwei Fu, Jiaxin Wei, Hadi Haeri, Vahab Sarfarazi, Mohammad Mehdi Chehrepak, Mohammad Fatehi (2025), International journal for numerical and analytical methods in geomechanics , 49(13), 2965-2980 (No: 35154)

12. Simulating the hydraulic fracturing mechanism around the hydrocarbon wellbores with emphasizing its effects on the sand production

Masoud Yazdani, Mohammad Fatehi, Mehdi Najafi, Manouchehr Sanei (2025), Journal of mining and environment , 16(1), 241-258 (No: 32879)

13. Failure mechanisms of concrete-bolt attachment surface: impact of cable bolt indent number and shape

Vahab Sarfarazi , Lei Zhou, Hadi Haeri, Parastou Salehipour, Ali Elahi, Mohammad Fatehi, Ali Moayer (2025), Journal of mining and environment , 16(1), 223-239 (No: 33208)

14. Thermo-mechanical analysis of crack propagation process in heterogeneous brittle coal and its effects on the ucg cavity growth rate

Mohammadreza Shahbazi, Mehdi Najafi, Mohammad Fatehi, Abolfazl Abdollahipour (2025), Energy science and engineering , 13(3), 1062-1078 (No: 33392)

15. Improving the tensile strength of reinforced concrete: evaluating the impact of different fiber additives through numerical and experimental analysis

Jinwei Fu, Vahab Sarfarazi, Hadi Haeri, Zhihao Wang, Mohammad Fatehi (2025), Computational particle mechanics , 12(), 775-792 (No: 33780) (10.1007/s40571-024-00839-3)

16. Numerical modeling of hydraulic fracturing for crack growth mechanism investigation in rocks using xfem with a bem-based verification

Mohammad Reza Zeerak, Mohammad Fatehi, Manouchehr Sanei, Mehdi Najafi, Abolfazl Abdollahipour (2025), Journal of mining and environment , 16(1), 1-26 (No: 35150)

17. Rock joint filling breakage under three different instant loading conditions; physical test and pfc simulation

Lei Zhou, Vahab Sarfarazi, Hadi Haeri, Armin Shahbazian, Arsham Moayedi Far, Mohammad Fatehi (2024), Computational particle mechanics , 11(3), - (No: 31749) (10.1007/s40571-024-00786-z)

18. Lattice numerical modeling of the effects of synthetic gas flow rate and pre-existing cleat dimensions on the crack propagation and cavity growth in ucg process

Mohammadreza Shahbazi, Mehdi Najafi, Mohammad Fatehi, Abolfazl Abdollahipour (2024), Journal of the brazilian society of mechanical sciences and engineering , 46(), 1-14 (No: 32313) (10.1007/s40430-024-04893-z)

19. A hybridized dda-ddm for modeling jointed rock masses

, Alireza Yarahmadi Bafghi, Mohammad Fatehi, Mir Hosein Shahami, Aboulfazl Abdollahi pour (2024), Theoretical and applied fracture mechanics , 131(104445), 1-11 (No: 32475)

20. Assessing the tensile crack growth in rock involves employing a seesawing apparatus and its calibrating through xfem: a new approach

Hadi Haeri, Vahab Sarfarazi, Pouyan Ebneabbasi, Mohammad Fatehi (2024), Iranian journal of science and technology-transactions of civil engineering , 48(), 2621-2639 (No: 32591) (10.1007/s40996-023-01334-0)

21. Experimental and numerical analyses of shear failure mechanisms of rock bolt surrounded by bedded rock

Jinwei Fu, Vahab Sarfaraz, Hadi Haeri, Alireza Seifi Zarei, Reza Bahrami, Mehrdad Imani , Mohammad Fatehi (2024), International journal of geomechanics , 24(4), 04024276-1-04024276-2 (No: 33181)

22. On 2d discrete element analyses of transversely isotropic elastic geo-materials; insight to scale effects and loading rate

Vahab Sarfarazi, Hadi Haeri, Mohammad Fatehi, Gholamreza Saeedi (2024), Journal of mining and environment , 15(3), 1051-1070 (No: 33184)

23. Dem analysis of the anisotropy effects on the failure mechanism of the layered concretes

Jinwei Fu, Vahab Sarfarazi, Hadi Haer, Mohammad Fatehi (2024), Computers and concrete , 33(66), 659-670 (No: 33186)

24. Real-time monitoring and alarm system for toxic gas in underground coal mines using smart helmets

Daniyal Ghadyani, Amirhossein Badraddini, Mirzehi Kalateh Kazemi Mohammad, vahab sarfarazi, Hadi Haeri, Jinwei Fu, Sohrab Naser Mostof, Vahid Khodabandeloo6, Mohammad Fatehi (2024), Journal of mining and environment , 0(), 1-14 (No: 33189)

25. Effects of porosity on the strength and mechanical behaviour of porous geo-materials under cyclic loading

Abolfazl Dalirnasab, Mohammad Fatehi, Hamid-Reza Nejati, (2024), Rudarsko-geolosko-naftni zbornik , 39(2), 15-30 (No: 33193)

26. Mechanical characteristics and crack propagation mechanism in rectangular and trapezoidal specimens of excavated pillars with various cavities: experimental and numerical investigations

Vahab Sarfarazi, Jinwei Fu, Hadi Haeri, Soheil Abharian, Haleh Rasekh , Masoud Behzadinasab, Mohammad Fatehi (2024), Computational particle mechanics , 11(), 2069-2069 (No: 33197)

27. Investigating the failure mechanism of x-shaped non-persistent joints under uniaxial loading: experimental and numerical analysis

Jinwei Fu, Vahab Sarfarazi, Hadi Haeri, Shahin Fattahi Dehkaboodi, Zahra Jalali Chi, Mohammad Fatehi (2024), Theoretical and applied fracture mechanics , 131(), 104462- (No: 33202)

28. Investigating the effects of porosity on the strength and mechanical behaviors of geo-materials' specimen

Abolfazl Dalirnasab, Mohammad Fatehi, Hamid Reza Nejati, (2024), Journal of analytical and numerical methods in mining engineering , 14(39), 1-12 (No: 33203)

29. Computational simulation and experimental analysis on wearing mechanisms of gypsum and concrete samples in pin-on-disk astm abrasion testing

Jinwei Fu, Vahab Sarfarazi, Hadi Haeri , Behzad Tolaminejad, Soheil Abharian, Haleh Rasekh, Manoj Khandelwal, Mohammad Fatehi (2024), International journal for numerical and analytical methods in geomechanics , 48(18), 4383-4398 (No: 33206)

30. Determination of mode i fracture toughness of brittle materials with a new method

Jinwei Fu, Hadi Haeri, Joseph F. Labuz, Vahab Sarfarazi, Pouyan Ebneabbasi, M. R. M. Aliha, Hamid Reza Karimi, Shirin Jahanmiri, Mohammad Fatehi (2024), Acta mechanica sinica , 40(), - (No: 30799) (10.1007/s10409-023-23236-x)

31. Discrete elements analysis of sand production mechanism in oil well considering effects of in situ stress and fluid pressure

Masoud Yazdani, Mohammad Fatehi, Hamid Soltanian, Mehdi Najafi, Manouchehr Sanei (2024), Journal of mining and environment , 15(4), 1509-1525 (No: 32321) (10.22044/jme.2024.13894.2585)

32. Coupling discontinuous deformation analysis and displacement discontinuity method for simulating failure mechanism in geomaterials

Mohsen Khanizadeh bahabadi, Alireza Yarahmadi Bafghi, Mohammad Fatehi, Mir Hosein Shahami, Aboulfazl Abdollahi pour (2024), Journal of mining and environment , 15(3), 1071-1087 (No: 32476)

34. Experimental and numerical investigation on the thickness effect of concrete specimens in a new tensile testing apparatus

Lei Zhou, Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi, A.A. Naderi, Hassannezhad Vayani Mohammadreza (2023), Computers and concrete , 31(), 71-84 (No: 29674) (10.12989/cac.2023.31.1.071)

35. Study on shear fracture behavior of soft filling in concrete specimens: experimental tests and numerical simulation

Lei Zhou, Vahab Sarfarazi, Hadi Haeri, Amir Aslan Naderi, Mohammad Fatehi, Fei Wu (2023), Structural engineering and mechanics , 85(), 337-351 (No: 29675) (10.12989/sem.2023.85.3.337)

36. Analytical solutions of first-order displacement discontinuity elements in poroelasticity

Mohamadhosein Dehqanifirozabadi, Mohammad Fatehi, Abolfazl Abdollahipour, Alireza Yarahmadi Bafghi, Yousef Mirzaeian lardkevan (2023), Journal of mining and environment , 14(2), 601-618 (No: 29678) (20.1001.1.22518592.2023.14.2.14.5)

37. Effects of particle size and loading rate on the tensile failure of asphalt specimens based on a direct tensile test and particle flow code simulation

D.C. Wang, J.W. Fu, Q. Wang, Vahab Sarfarazi, Hadi Haeri, C.L. Guo, L.J. Sun, Mohammad Fatehi (2023), Structural engineering and mechanics , 86(), 607-619 (No: 29679) (10.12989/sem.2023.86.5.607)

40. Failure mechanism of circlular tunnel supported by concrete layers under uniaxial compression: numerical simulation and experimental test

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Amir Aslan Naderi, Shirin Jahanmiri, Jafar Jafari, Mohammad Fatehi (2023), Theoretical and applied fracture mechanics , 125(), 103839- (No: 29684) (10.1016/j.tafmec.2023.103839)

41. Prediction of elastic parameters in gas reservoirs using ensemble approach

Mohammadreza Aghakhani Amamghaisi, Mohammad Fatehi, Abbas Hashemizadeh, Abolfazl Abdollahipour, Manouchehr Sanei (2023), Environmental earth sciences , 82(), - (No: 29688) (10.1007/s12665-023-10958-4)

42. Influence of arch shaped notch angle, length and opening on the failure mechanism of rock like material and acoustic emission properties: experimental test and numerical simulation

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Amir Aslan Naderi, Mohammad Fatehi, Leige Xu (2023), Theoretical and applied fracture mechanics , 125(), 103879- (No: 29690) (10.1016/j.tafmec.2023.103879)

43. Numerical modeling of the effect of andersons stress regimes on the volume of sand production in oil wellbores

Abolfazl Abdollahipour, Alireza Kargar, Mohammad Fatehi (2023), Journal of analytical and numerical methods in mining engineering , 13(35), 31-38 (No: 29691)

44. Investigation of shear properties of open non-persistent latitudinal discontinuities of same level

Vahab Sarfarazi, Hadi Haeri, Mohammad Fatehi, Gholamreza Saeedi, Amir Namdarmanesh (2023), Journal of mining and environment , 14(4), 1361-1371 (No: 29692)

45. Superior crack propagation inhibitory effectiveness of mwcnt reinforced sbs toward improving oil/gas well cement integrity

Mohammad Fatehi, Hatef Yousofian, Hamid Soltanian, Yaser Pourmazaheri, Abolfazl Abdollahipour (2023), Construction and building materials , 403(), 133171- (No: 29693) (10.1016/j.conbuildmat.2023.133171)

46. The explosive fracturing technique analysis for highly low permeable reservoirs using analytical, displacement discontinuity and finite difference coupled method

Mohammad Fatehi, Meysam Lak, Manouchehr Sanei (2023), , 6(3), 43-57 (No: 30617)

48. Numerical simulation of fatigue crack propagation in heterogeneous geomaterials under varied loads using displacement discontinuity method

Rezvan Alizadeh, Mohammad Fatehi, Abolfazl Abdollahipour, Mehdi Pourghasemi (2023), Journal of rock mechanics and geotechnical engineering , -(15), 706-715 (No: 28677) (10.1016/j.jrmge.2022.12.001)

49. Experimental evaluation and discrete element modeling of shale delamination mechanism

Enayatallah Emami Meybodi, Syed khaliq Hussain, Mohammad Fatehi (2023), Journal of mining and environment , 14(1), 259-275 (No: 28898) (10.22044/jme.2023.12526.2273)

50. Crack growth mechanism in granite specimens with non-persistent joints under punch shear through test

vahab sarfarazi, Mohammad Fatehi, hadi Haeri (2023), Journal of analytical and numerical methods in mining engineering , 12(33), 17-26 (No: 29671)

51. A thermo-mechanical simulation for the stability analysis of a horizontal wellbore in underground coal gasification

Mohammadreza Shahbazi, Mehdi Najafi, Mohammad Fatehi, Ramin Rafiee (2023), Petroleum , 4(9), - (No: 30297) (10.1016/j.petlm.2023.11.003)

52. Experimental test and pfc3d simulation of the effect of a hole on the tensile behavior of concrete: a comparative analysis of four different hole shapes

Lei Zhou, Hadi Haeri, Vahab Sarfarazi, Soheil Abharian, Manoj Khandelwal, Mohammad Fatehi (2023), Mechanics based design of structures and machines , -(-), 1-23 (No: 30912) (10.1080/15397734.2023.2174134)

54. A proper borehole pattern design for coal seam methane drainage in tabas coal mine using comsol multiphysics

Ali Bagherzadeh, Mehdi Najafi, Mohammad Fatehi, Mehdi Noroozi (2022), Journal of sustainable mining , 21(), 54-64 (No: 27044) (10.46873/2300-3960.1347)

55. Cavity growth in underground coal gasification method by considering cleat length and inclination of coal with elasto-brittle behavior

Mohammadreza Shahbazi, Mehdi Najafi, Mohammad Fatehi, A. Abdollahipour (2022), Journal of mining and environment , 13(2), 607-625 (No: 27206) (10.22044/jme.2022.11906.2183)

56. Application of machine learning models for predicting rock fracture toughness mode-i and mode-ii

Enayatallah Emami Meybodi, Syed khaliq Hussain, Mohammad Fatehi, Vamegh Rasouli (2022), Journal of mining and environment , 13(2), 467-482 (No: 27250) (10.22044/JME.2022.11596.2148)

57. Study of tensile crack growth in rock-like materials under punch shear test

Jinwei Fu, Vahab Sarfarazi, Hadi Haeri, Armin Shahbazian, Mohammad Fatehi, Yibing Yu (2022), Theoretical and applied fracture mechanics , 121(), 103509- (No: 27493) (10.1016/j.tafmec.2022.103509)

59. Investigation of the tensile behavior of joint filling under experimental test and numerical simulation

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi, Mengdi Guo (2022), Structural engineering and mechanics , 81(2), 243-258 (No: 27496) (10.12989/sem.2022.81.2.243)

60. The comparison between nbd test results and scb test results using experimental test and numerical simulation

Jinwei Fu, Vahab Sarfarazi, Hadi Haeri, K. Naderi, Mohammad Fatehi, Mengdi Guo (2022), Advances in concrete construction , 13(1), 83-99 (No: 27498) (10.12989/acc.2022.13.1.083)

61. The shear behaviors of concrete-gypsum specimens containing double edge cracks under four-point loading conditions

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Kaveh Asgari, Mohammad Fatehi (2022), Theoretical and applied fracture mechanics , 119(), 103361- (No: 27499) (10.1016/j.tafmec.2022.103361)

62. The numerical investigation of tensile strength of coal model on the performance of coal plow using particle flow code

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi, Tong Li (2022), Structural engineering and mechanics , 82(), 713-724 (No: 27502) (10.12989/sem.2022.82.6.713)

63. Experimental and numerical evaluation of the effects of interaction between multiple small holes and a single notch on the mechanical behavior of artificial gypsum specimens

Soheil Abharian, Vahab Sarfarazi, Mohammad Fatehi, Haleh Rasekh (2022), Theoretical and applied fracture mechanics , 121(), 103462- (No: 27514) (10.1016/j.tafmec.2022.103462)

65. Effects of transversely isotropic layers on failure mechanism of non-homogeny concrete-soil specimens

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Mostafa Mehri, Kaveh Asgari, Mohammad Fatehi (2022), Geomechanics and geophysics for geo-energy and geo-resources , 8(163), 1-18 (No: 27660) (10.1007/s40948-022-00473-4)

66. Simulation of crack propagation mechanism in porous media using the modified linear element displacement discontinuity method

Mohamadhosein Dehqanifirozabadi, Mohammad Fatehi, Abolfazl abdollahipour, Alireza Yarahmadi Bafghi, Yousef Mirzaeian lardkevan (2022), Journal of mining and environment , 13(3), 903-927 (No: 27661)

67. 3d numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the zagros sedimentary basin

Mohammadreza Aghakhani Amamghaisi, Mohammad Fatehi, Abbas Hashemizadeh, Manouchehr Sanei, Abolfazl Abdollahipour (2022), , 5(3), 26-42 (No: 27662)

68. Investigating the effects of non-persistent cracks' parameters on the rock fragmentation mechanism underneath the u shape cutters using experimental tests and numerical simulations with pfc2d

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Sh. Mohamadi Bolban Abad, Mohammad Fatehi, Gholamreza Saeedi, Yibing Yu (2022), Structural engineering and mechanics , 83(4), 495-513 (No: 27758) (10.12989/sem.2022.83.4.495)

69. Experimental investigation on deformation behavior of circular underground opening in hard soil using a 3d physical model

Jinwei Fu, Mohammad Reza Safaei, Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi, Leige Xu, Ali Arefnia (2022), Journal of mining and environment , 13(3), 727-749 (No: 27762)

70. Effects of axial loading width and immediate roof thickness on the failure mechanism of a notched roof in room and pillar mining: experimental test and numerical simulation

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Nima Babanouri, Amir Rezaei, Mohammad Omidi Manesh, Reza Bahrami, Mohammad Fatehi (2022), Rock mechanics and rock engineering , 55(), - (No: 27882) (10.1007/s00603-022-03082-5)

71. Experimental and numerical studies on the effect of geogrid-reinforcement on the tensile failure of high strength self-compacted concrete

Soheil Abharian, Vahab Sarfarazi, Mohammad Fatehi, Haleh Rasekh, Abouzar Sadrekarimi (2022), Magazine of concrete research , (-), 1-23 (No: 28117) (10.1680/jmacr.21.00284)

72. Modeling the ligament breakage mechanism in concrete specimens using a four-point bending test

J. W. Fu, H. Haeri, V. Sarfarazi, Mohammad Fatehi (2022), Strength of materials , 54(), 671-680 (No: 28118) (10.1007/s11223-022-00445-9)

73. Pfc simulation of brazilian tensile strength test in geomaterials' specimens with t-shaped non-persistent joints

vahab sarfarazi, Hadi Haeri, Fereshteh Bagheri, Erfan Zarrin ghalam, Mohammad Fatehi (2022), Journal of mining and environment , 13(4), 1189-1209 (No: 28119)

74. Plaxis 3d simulation, flac3d analysis and in situ monitoring of excavation stability

Lei Zhou, Zahra Jalalichi, Vahab Sarfarazi, Hadi Haeri , Parviz Moarefvand, Mohammad Fatehi, Shahin Fattahi (2022), Structural engineering and mechanics , 84(6), 743-765 (No: 28188)

75. Study of cracks in compressed concrete specimens with a notch and two neighboring holes

Vahab Sarfarazi, Kaveh Asgari, Shirin Jahanmiri, Mohammad Fatehi, Alireza Mohammadi Khachakini (2022), Advances in concrete construction , 15(5), 317-330 (No: 28192)

77. Physical test for analysis of failure behavior of embedded notches

J. W. Fu, V. Sarfarazi, A. A. Naderi, H. Haeri, Mohammad Fatehi, T. Li (2022), Strength of materials , 54(6), 1145-1154 (No: 29667) (10.1007/s11223-023-00489-5)

78. Calibrating a new compressive-to-tensile load-transferring device for determining the direct tensile strength of granite

W. Fu J., Sarfarazi Vahab, Amir Aslan Naderi, Hadi Haeri, Mohammad Fatehi, Li T. (2022), Strength of materials , (54), 959-966 (No: 29670)

80. Key group analysis based on dda method for rock slope stability analysis

Mir Hosein Shahami, Alireza Yarahmadi Bafghi, Mohammad Fatehi (2022), Journal of analytical and numerical methods in mining engineering , 11(29), 17-25 (No: 24476)

81. Mechanism of failure in the semi-circular bend (scb) specimen of gypsum-concrete with an edge notch

Jinwei Fu, Vahab Sarfarazi, Hadi Haeri, Mohammad Fatehi, Mengdi Guo (2022), Structural engineering and mechanics , 81(), 81-91 (No: 27492) (10.12989/sem.2022.81.1.081  )

82. Investigating the failure behavior of gypsum specimens with non-persistent vertical notch under uniaxial compression

J. W. Fu, H. Haeri, V. Sarfarazi, A. H. Noshadi, Mohammad Fatehi, M. D. Guo (2022), Strength of materials , 54(), 14-32 (No: 27500) (10.1007/s11223-022-00374-7)

83. Development of higher-order displacement discontinuity method to simulate fatigue crack growth in brittle materials

Rezvan Alizadeh, Mohammad Fatehi, Abolfazl Abdollahipour, Mehdi Pourghasemi (2021), Engineering fracture mechanics , 258(), 108087- (No: 26391) (10.1016/j.engfracmech.2021.108087)

84. A coupled experimental and numerical simulation of concrete joints' behaviors in tunnel support using concrete specimens

Fei Zhou, Vahab Sarfarazi, Hadi Haeri, Mohammad Hosein Soleymanipargoo , Jinwei Fu, Mohammad Fatehi (2021), Computers and concrete , 28(2), 189-208 (No: 26395)

85. Simulation of groundwater contamination by leakage from waste-filled mine

Mojtaba Dehqani Tafti, Faramarz Doulati Ardejani, Mohammad Fatehi, Yousef Shiri (2021), Rudarsko-geolosko-naftni zbornik , 36(), 49-55 (No: 26558) (10.17794/rgn.2021.5.5)

86. Compressive failure analyses of rock-like materials by experimental and numerical methods

Mohammad Davood Yavari, Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi, Hossein Ali Lazem (2021), Journal of mining and environment , 12(3), 769-783 (No: 26559)

87. Numerical simulation of the interaction between normal fault and bedding planes using pfc

Hadi Haeri, Vahab Sarfarazi , Mohammad Fatehi (2021), Iranian journal of science and technology-transactions of civil engineering , (45), 573-588 (No: 26566)

88. A new approach for measurement of the fracture toughness using the edge cracked semi-cylinder disk (ecsd) concrete specimens

Lei Zhou, Vahab Sarfarazi, Hadi Haeri, Pouyan Ebneabbasi, Mohammad Fatehi, Mohammadreza Hassannezhad Vayani (2021), Mechanics based design of structures and machines , 2021(), 1-21 (No: 26568) (10.1080/15397734.2021.1911667)

89. Evaluating the fragility curve in steel\u2013concrete structure undergoing seismic progressive collapse by finite element method

Hadi Haeri, Mohammad Maleki, Hamzeh Shahvali, Vahab Sarfarazi, Mohammad Fatehi (2021), Iranian journal of science and technology-transactions of civil engineering , 2021(), - (No: 26570) (10.1007/s40996-021-00764-y)

90. Simulation of aquifer remediation from low-permeable lenses by back-diffusion phenomenon

Mojtaba Dehqani Tafti, Faramarz Doulati Ardejani, Mohammad Fatehi, Yousef Shiri (2021), Rudarsko-geolosko-naftni zbornik , 36(), 57-66 (No: 26571) (10.17794/rgn.2021.5.6)

91. Extended finite element method simulation and experimental test on failure behavior of defects under uniaxial compression

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Kaveh Asgari, Pooyan Ebneabbasi, Mohammad Fatehi, Mengdi Guo (2021), Mechanics of advanced materials and structures , 2021(), 1-16 (No: 26572) (10.1080/15376494.2021.1989730)

92. Investigating the tensile strength of concrete-gypsum interface using the ring type bi-material specimens

Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi (2021), Arabian journal of geosciences , 14(), - (No: 26573) (10.1007/S12517-021-08096-X)

93. Interaction between the notch and mortar-mortar interface (with different inclinations) in semi-circular bend specimens

Jinwei Fu, Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi (2021), Iranian journal of science and technology-transactions of civil engineering , 2021(), - (No: 26638) (10.1007/s40996-021-00774-w)

94. A modified indirect boundary element analysis for fatigue behavior assessment of rock-like materials based on linear elastic fracture mechanics

Rezvan Alizadeh, Mohammad Fatehi, Abolfazl Abdollahipour, Mehdi Pourghasemi (2021), Journal of mining and environment , 12(4), 1187-1201 (No: 26649)

95. A linear elastic fracture mechanics analysis of the pre-cracked concrete failure mechanism under modes i, ii, iii, and iv loading conditions

J. Fu, H. Haeri, M. D. Yavari, V. Sarfarazi, Mohammad Fatehi, M. Guo (2021), Strength of materials , 53(), 784-796 (No: 27503) (10.1007/s11223-021-00344-5)

96. Effects of the measured noise on the failure mechanism of pre-cracked concrete specimens under the loading modes i, ii, iii, and iv

J. Fu, H. Haeri, M. D. Yavari, V. Sarfarazi, Mohammad Fatehi (2021), Strength of materials , 53(), 938-949 (No: 27505) (10.1007/s11223-022-00362-x)

98. On propagation mechanism of cracks emanating from two neighboring holes in cubic concrete specimens under various lateral confinements

M. Yavari, H. Haeri, V. Sarfarazi, Mohammad Fatehi, H. A. Lazemi (2021), Journal of mining and environment , 12(4), 1003-1017 (No: 27519) (10.22044/jme.2021.10834.2054)

99. Numerical modeling of borehole breakouts formation in various stress fields using a higher-order displacement discontinuity method (hoddm)

Abolfazl Abdollahipour, Mohammad Fatehi (2021), , 4(3), 1-18 (No: 27887)

100. Investigation of the interaction between concrete-gypsum interface and internal notch using experimental test and numerical simulation

Alireza Bagher Shemirani, Hadi Haeri, Vahab Sarfarazi, Pouyan Ebneabbasi, Mohammad Fatehi (2021), Mechanics based design of structures and machines , 49(1), 1-24 (No: 24477) (10.1080/15397734.2020.1864639)

101. On direct tensile strength measuring of anisotropic rocks

vahab sarfarazi, Hadi Haeri, Mohammad Fatehi (2021), Journal of mining and environment , 12(2), 491-499 (No: 26557) (10.22044/jme.2021.10601.2013)

102. Static and dynamic response of rock engineering models

Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi (2021), Iranian journal of science and technology-transactions of civil engineering , 2021(), - (No: 26576) (10.1007/s40996-020-00564-w)

103. A thermo-hydromechanical displacement discontinuity method to model fractures in high-pressure, high-temperature environments

, Mohammad Fatehi (2020), Renewable energy , 153(), 1488-1503 (No: 24478)

104. Wellbore trajectory optimization of an iranian oilfield based on mud pressure and failure zone

Hatet Yousefian, Mohammad Fatehi, Hamid Soltanian, Aboulfazal Abaollahipour, Yaser Pourmazahri (2020), Journal of mining and environment , 11(1), 193-220 (No: 24481)

105. Xfem and experimental simulation of failure mechanism of non-persistent joints in mortar under compression1

Hadi Haeri, Vahab Sarfarazi, Pouyan Ebneabbasi, A Nazari maram, Mohammad Fatehi, A Shahbazian, A.R Mohamadi (2020), Construction and building materials , 237(), 117500-1-117500-14 (No: 24471)

106. Experimental and numerical investigation of uniaxial compression failure in rock-like specimens with l-shaped nonpersistent cracks

Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi (2020), Iranian journal of science and technology-transactions of civil engineering , --(--), - (No: 24473) (10.1007/s40996-020-00386-w)

107. Numerical simulation of compressive to tensile load conversion for determining the tensile strength of ultra-high performance concrete

Hadi Haeri, Nader Mirshekari, Vahab Sarfarazi,, Mohammad Fatehi (2020), Smart structures and systems , 26(5), 605-617 (No: 24479)

108. Numerical simulation of the effect of confining pressure and tunnel depth on the vertical settlement using particle flow code (with direct tensile strength calibration in pfc modeling)

Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi (2020), Smart structures and systems , 25(4), 433-446 (No: 24482)

109. Lattice numerical simulations of hydraulic fractures interacting with oblique natural interfaces

ELHAM BAKHSHI, Vamegh Rasouli, Ahmad Ghorbani, Mohammad Fatehi (2019), International journal of mining and geo-engineering , 53(1), 83-89 (No: 19897)

110. Lattice numerical simulations of lab-scale hydraulic fracture and natural interface interaction

ELHAM BAKHSHI, V. Rasouli, Ahmad Ghorbani, Mohammad Fatehi, B. Damjanac, X. Wan (2019), Rock mechanics and rock engineering , 52(5), 1315-1337 (No: 20213) (10.1007/s00603-018-1671-2)

111. Hydraulic fracture propagation: analytical solutions versus lattice simulations

ELHAM BAKHSHI, Vamegh Rasouli, Ahmad Ghorbani, Mohammad Fatehi (2019), Journal of mining and environment , 10(2), 451-464 (No: 20235)

113. A coupled finite difference-boundary element method for modeling the propagation of explosion-induced radial cracks around a wellbore

Meysam Lak, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Abolfazl Abdollahipour (2019), Journal of natural gas science and engineering , 64(), 41-51 (No: 21879)

114. Investigating the effect of external forces on the displacement accuracy of discontinuous deformation analysis (dda) method

Mir Hosein Shahami, Alireza Yarahmadi Bafghi, Mohammad Fatehi (2019), Computers and geotechnics , 111(), 313-323 (No: 21881) (10.1016/j.compgeo.2019.03.025)

115. Sensitivity analysis of geomechanical parameters affecting a wellbore stability

Abolfazl Abdollahipour, Hamid Soltanian, Yaser Pourmazaheri, Kazemzadeh Ezzatollah, Mohammad Fatehi (2019), Journal of central south university , 26(3), 768-778 (No: 24470)

116. On the mitigating environmental aspects of a vertical well in underground coal gasification method

Mohammadreza Shahbazi, Mehdi Najafi, Mohammad Fatehi (2019), Mitigation and adaptation strategies for global change , 24(3), 373-398 (No: 17813) (10.1007/s11027-018-9816-x)

118. A 3d numerical model to determine suitable reinforcement strategies for passing tbm through a fault zone, a case study: safaroud water transmission tunnel, iran

Mohammad sina Abdollahi, Mehdi Najafi, Alireza Yarahmadi Bafghi, Mohammad Fatehi (2019), Tunnelling and underground space technology , 88(6), 186-199 (No: 20054)

119. Discontinued rock slope analysis through a new tfs-kgm analytical method

, Alireza Yarahmadi Bafghi, Mohammad Fatehi, Javad Gholamnejad (2019), Journal of analytical and numerical methods in mining engineering , 8(17), 1-18 (No: 20172)

120. Discrete element modeling of explosion-induced fracture extension in jointed rock masses

Meysam Lak, Mohammad Fatehi, Alireza Yarahmadi Bafghi, abolfazl abdollahi pour (2019), Journal of mining and environment , 10(1), 125-138 (No: 21098)

121. Analytical and numerical modeling of rock blasting operations using a two-dimensional elasto-dynamic green's function

Meysam Lak, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Abolfazl Abdollahipour (2019), International journal of rock mechanics and mining sciences , 114(), 208-217 (No: 21880) (10.1016/j.ijrmms.2018.12.022)

122. Investigation of shear behavior of soil-concrete interface

hadi Haeri, Vahhab Sarafraz, Zheming Zhu, Mohammad Fatehi, Alireza Masoumi (2019), Smart structures and systems , 23(1), 81-90 (No: 24469)

123. Experimental and numerical studies of the pre-existing cracks and pores interaction in concrete specimens under compression

Hadi Haeri, Vahab Sarfarazi, Zheming Zhu, Mohammad Fatehi (2019), Smart structures and systems , 23(5), 479-493 (No: 24472)

124. Interaction between two neighboring tunnel using pfc2d

Vahab Sarfarazi, Hadi Haerه, Salman Safavi, Mohammad Fatehi, Zheming Zhu (2019), Structural engineering and mechanics , 71(1), 77-87 (No: 24474)

125. Numerical simulation of the effect of bedding layer on the tensile failure mechanism of rock using pfc2d

Vahab Sarfarazi, Hadi Haeri, Mohammad Fatehi (2019), Structural engineering and mechanics , 69(1), 43-50 (No: 24475)

127. Simulation of the tensile failure behaviour of transversally bedding layers using pfc2d

hadi haeri, vahab sarfarazi, zhu zheming, Mohammad Fatehi (2018), Structural engineering and mechanics , 5(67), 493-504 (No: 18705)

128. Numerical simulation of a wellbore stability in an iranian oilfield utilizing core data

Hatef Yousefian, Hamid Soltanian, Mohammad Fatehi, Abolfazl Abdollahipour, Yaser Pourmazaheri (2018), Journal of petroleum science and engineering , 168(), 577-592 (No: 18708) (10.1016/j.petrol.2018.04.051)

129. Behavior of a hydraulic fracture in permeable formations

abolfazl abdollahipour, Mohammad Fatehi, hamid soltanian, ezatola kazemzadeh (2018), Journal of mining and environment , 9(4), 893-904 (No: 18715)

130. Displacement discontinuity analysis of the effects of various hydraulic fracturing parameters on the crack opening displacement (cod)

abolfazl moradi, behzad tokhmechi, rasolui vamegh, Mohammad Fatehi (2018), Journal of petroleum science and technology , 8(3), 3-13 (No: 18724)

132. Numerical simulation of the effect of bedding layer geometrical properties on the shear failure mechanism using pfc3d

hadi Haeri, vahab sarfarazi, zhu zheming, Mohammad Fatehi (2018), Smart structures and systems , 22(5), 611-620 (No: 18732)

133. Experimental and numerical simulating of the crack separation on the tensile strength of concrete

vahab sarfarazi, hadi haeri, alireza bagher shemirani, zheming zhu, Mohammad Fatehi (2018), Structural engineering and mechanics , 66(5), 569-582 (No: 18734)

134. Investigation of the model scale and particle size effects on the point load index and tensile strength of concrete using particle flow code

hadi haeri, vahab sarfarazi, zhu zheming, ahmad reza hedayat, Mohammad Fatehi (2018), Structural engineering and mechanics , 66(4), 445-452 (No: 18735)

135. Simulating the influence of pore shape on the brazilian tensile strength of concrete specimens using pfc2d

hadi Haeri, vahab sarfarazi, zhu zheming, Mohammad Fatehi (2018), Computers and concrete , 22(5), 469-479 (No: 18739)

136. The effect of particle size on the edge notched disk (end) using particle flow code in three dimension

Hadi Haeri, Vahab Sarfarazi, Zheming Zhu, Mohammad Fatehi (2018), Smart structures and systems , 22(), 663-673 (No: 30757) (10.12989/sss.2018.22.6.663)

137. Three-dimensional modelling of reservoir fluid typing by applying nuclear magnetic resonance (nmr) and thermophysical parameters

Amin HosseinMorshedy, Mohammad Fatehi (2018), Bollettino di geofisica teorica ed applicata , 59(1), 95-106 (No: 17728)

138. A discrete element simulation of a punch-through shear test to investigate the confining pressure effects on the shear behaviour of concrete cracks

alireza bagher shemirani, vahab sarfarazi, hadi haeri, Mohammad Fatehi, Seyed Shahin Hosseini (2018), Computers and concrete , 21(2), 189-197 (No: 18725)

139. On the direct experimental measurement of mortar fracture toughness by a compression-to-tensile load transformer (ctlt)

Hadi Haeri, Vahab Sarfarazi, Alireza Bagher Shemirani, Mohammad Fatehi (2018), Construction and building materials , 181(), 687-712 (No: 24480)

140. A fourth order formulation of ddm for crack analysis in brittle solids

, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Javad Gholamnejad (2017), Journal of analytical and numerical methods in mining engineering , 6(1), 25-40 (No: 17097)

141. A comprehensive numerical study of hydraulic fracturing process and its affecting parameters

Abolfazl Moradi, Behzad Tokhmechi, Vamegh Rasouli, Mohammad Fatehi (2017), Geotechnical and geological engineering , 35(3), 1035-1050 (No: 17099) (10.1007/s10706-017-0159-2)

145. Rock mass structural data analysis using image processing techniques (case study choghart iron ore mine northern slopes)

, Alireza Yarahmadi Bafghi, Mohammad Fatehi, Javad Gholamnejad (2017), Journal of mining and environment , 8(1), 61-74 (No: 14443)

146. Fracture mechanism of brazilian discs with multiple parallel notches using pfc2d

vahab sarfarazi, hadi haeri, Mohammad Fatehi (2017), Periodica polytechnica-civil engineering , 1(), - (No: 14922)

147. Analyses of inclined cracks neighboring two iso-path cracks in rock-like specimens under compression

, Mohammad Fatehi (2017), Geotechnical and geological engineering , 35(1), 169-181 (No: 17319) (10.1007/s10706-016-0095-6)

148. A complete formulation of an indirect boundary element method for poroelastic rocks

, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Javad Gholamnejad (2016), Computers and geotechnics , 74(), 15-25 (No: 11311) (10.1016/j.compgeo.2015.12.011)

149. A boundary element/finite difference analysis of subsidence phenomenon due to underground structures

Sayyed Esmaeil Mirsalari, Mohammad Fatehi, Javad Gholamnejad, Mehdi Najafi (2016), Journal of mining and environment , 1(8), 238-253 (No: 12814)

150. Effect of joint spacing and joint dip on the stress distribution around tunnels using different numerical methods

, Mohammad Fatehi, Reza Rahman nejad, Alireza Yarahmadi Bafghi (2016), Journal of african earth sciences , (123), 193-209 (No: 12883)

151. Experimental and numerical study of shear fracture in brittle materials with interference of initial double cracks

Hadi Haeri, Vahab Sarfarazi, Mohammad Fatehi, Ahmadreza Hedayat, Zheming Zhu (2016), Acta mechanica solida sinica , 29(), 555-566 (No: 14923) (10.1016/S0894-9166(16)30273-7)

152. Analysis of stress distribution around tunnels by hybridized fsm and ddm considering the influ-ences of joints parameters

, Mohammad Fatehi (2016), Geomechanics and engineering , 11(2), 268-288 (No: 14924)

153. Numerical investigation of effect of crack geo-metrical parameters on hydraulic fracturing pro-cess of hydrocarbon

, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Javad Gholamnejad (2016), Journal of mining and environment , 7(2), 205-214 (No: 14925)

155. Time-dependent crack propagation in a poroelastic medium using a fully coupled hydromechanical displacement discontinuity method

, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Javad Gholamnejad (2016), International journal of fracture , 197(2), - (No: 11367)

156. Simulating the crack propagation and cracks coalescence underneath tbm disc cutters

Hadi Haeri, Mohammad Fatehi (2016), Arabian journal of geosciences , 9(), - (No: 11371) (10.1007/s12517-015-2137-4)

157. On the accuracy of higher order displacement discontinuity method (hoddm) in the solution of linear elastic fracture mechanics problems

, Mohammad Fatehi, Javad Gholamnejad, Alireza Yarahmadi Bafghi (2016), Journal of central south university , (23), 2941-2950 (No: 14439)

158. Simulation of crack coalescence mechanism underneath single and double disc cutters by higher order displacement discontinuity method

Mohammad Fatehi (2015), Journal of central south university , 22(), 1-10 (No: 7382)

159. Accurate estimation of scale independent joint roughness coefficient jrc by optimized

, Alireza Yarahmadi Bafghi, Mohammad Fatehi, Javad Gholamnejad (2015), Indian journal of fundamental and applied life sciences , 5(3), 2427-2442 (No: 10854)

160. Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs

, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Javad Gholamnejad (2015), Journal of mining and environment , 7(2), - (No: 10855)

161. Simulating the propagation of hydraulic fractures from a circular wellbore using the displacement discontinuity method

, Mohammad Fatehi, Alireza Yarahmadi Bafghi, Javad Gholamnejad (2015), International journal of rock mechanics and mining sciences , 80(), 281-291 (No: 10957) (10.1016/j.ijrmms.2015.10.004)

162. Accurate estimation of scale independent joint roughness coefficient jrc by optimized box counting algorithm

, Alireza Yarahmadi Bafghi, Mohammad Fatehi, Javad Gholamnejad (2015), Indian journal of fundamental and applied life sciences , 3(5), 2427-2442 (No: 11261)

163. Experimental and numerical simulation of the microcrack coalescence mechanism in rock-like materials

H. Haeri, A. Khaloo, Mohammad Fatehi (2015), Strength of materials , 47(5), 740-754 (No: 11370) (10.1007/s11223-015-9711-6)

164. Experimental and numerical analysis of brazilian discs with multiple parallel cracks

Hadi Haeri, Alireza Khaloo, Mohammad Fatehi (2015), Arabian journal of geosciences , 8(), 5897-5908 (No: 11373) (10.1007/s12517-014-1598-1)

165. Numerical modelling of stress analysis around rectangular tunnels with large discontinuities (fault) by a hybridized indirect bem

, Mohammad Fatehi, (2015), Journal of central south university , 22(), 4291-4299 (No: 14926) (10.1007/s11771-015-2977-9)

167. Fracture analyses of different pre-holed concrete specimens under compression

Hadi Haeri, Alireza Khaloo, Mohammad Fatehi (2015), Acta mechanica sinica , 31(), 855-870 (No: 30752) (10.1007/s10409-015-0436-3)

168. A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension

, , , , Mohammad Fatehi (2015), Journal of mining and environment , 6(), - (No: 8453)

169. Numerical simulation of interaction between hydraulic and natural fractures in discontinuous media

, , Mohammad Fatehi, (2014), Acta geotechnica , 1(), 1-20 (No: 7350)

170. Simulating the effect of disc erosion in tbm disc cutters by a semi-infinite ddm

, Mohammad Fatehi, (2014), Arabian journal of geosciences , 1(), 1-13 (No: 7465)

171. Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

, , Mohammad Fatehi, (2014), Journal of central south university , 21(), 2404-2414 (No: 8370)

172. A coupled experimental and numerical simulation of rock slope joints behavior

, , Mohammad Fatehi (2014), Arabian journal of geosciences , 7(), - (No: 8371)

173. Experimental and numerical study of crack propagation and coalescence in pre-cracked rock-like disks

Hadi Haeri, Kourosh Shahriar, Mohammad Fatehi, Parviz Moarefvand (2014), International journal of rock mechanics and mining sciences , 67(), 20-28 (No: 30716) (10.1016/j.ijrmms.2014.01.008)

174. Experimental and numerical study of crack propagation and coalescence in pre-cracked rock-like discs

H H, K sh, Mohammad Fatehi, P M (2014), International journal of rock mechanics and mining sciences , 67(), 20-28 (No: 4118)

175. On the crack propagation analysis of rock like brazilian disc specimens containing cracks under compressive line loading

, , Mohammad Fatehi, (2014), Latin american journal of solids and structures , 11(), 1400-1416 (No: 7384)

176. On the hdd analysis of micro crack initiation propagation and coalescence in brittle materials

, , Mohammad Fatehi, (2014), Arabian journal of geosciences , 1(), 1-12 (No: 7469)

177. Numerical analysis of quasi-static crack branching in brittle solids by a modified displacement discontinuity method

Mohammad Fatehi (2014), International journal of solids and structures , 51(), 1716-1736 (No: 7470)

178. A hybridized numerical and regression method for estimating the minimum rock pillar width of twin circular tunnels

, Javad Gholamnejad, Mohammad Fatehi (2014), Arabian journal of geosciences , 7(), 1059-1066 (No: 8372)

179. A coupled numerical experimental study of the breakage process of brittle substances

, , Mohammad Fatehi, (2013), Arabian journal of geosciences , 6(), 1-17 (No: 6994)

180. On the use of power series solution method in the crack analysis of brittle materials by indirect boundary element method

Mohammad Fatehi (2013), Engineering fracture mechanics , 98(), 365-382 (No: 7467)

181. A bonded particle model for analysis of the flaw orientation effect on crack propagation mechanism in brittle materials under compression

, , Mohammad Fatehi, Javad Gholamnejad (2013), Archives of civil and mechanical engineering , 14(), 40-52 (No: 7333)

182. Numerical simulation of crack propagation in layered formations

, , Mohammad Fatehi, (2013), Arabian journal of geosciences , 1(), 1-25 (No: 7353)

183. Numerical analysis of confinement effect on crack propagation mechanism from a flaw in a pre-cracked rock under compression

, Mohammad Fatehi (2012), Acta mechanica sinica , 28(), 1389-1397 (No: 8368)

184. Comparison of indirect boundary element and finite element methods a case study shiraz-esfahan railway tunnel in iran

, Mohammad Fatehi, (2012), Frontiers of structural and civil engineering , 6(4), 385-392 (No: 8369)

185. Relationship between fracture dip angle aperture and fluid flow in the fractured rock masses

, Javad Gholamnejad, Mohammad Fatehi (2011), Journal of mining and environment , 2(2), 136-145 (No: 8456)

186. Kinked crack analysis by a hybridized boundary element/boundary collocation method

Mohammad Fatehi, (2010), International journal of solids and structures , 47(), 922-933 (No: 6814)

187. Numerical modeling of crack propagation in rocks under tbm disc cutters

Mohammad Fatehi, Hasan Hosseini Nasab, Amin HosseinMorshedy (2009), Journal of mechanics of materials and structures , 4(3), 605-627 (No: 6811)

189. On the uses of special crack tip elements in numerical rock fracture mechanics

Mohammad Fatehi, Hasan Hosseini Nasab, Amir Hossein Kouhsari (2006), International journal of solids and structures , (43), 1669-1692 (No: 89)

190. Computing electromagnetic field distribution due to an arbitrary shape exciter near multilayer slab conductors

Hossein Fatehi, Seyed Hesam Sadeghi, Mohammad Fatehi, R. Moini (2005), Ieee transactions on magnetics , 41(), 1132-1136 (No: 30695) (10.1109/TMAG.2004.843312)

191. New scalar potential method for computation of electromagnetic variables in multilayer slab conductors

H. Fatehi, Mohammad Fatehi (2005), Ieee transactions on magnetics , 41(), 1137-1141 (No: 30696) (10.1109/TMAG.2004.843314)