دسترسی سریع
سعید حسنی
دانشیار، دانشکده مهندسی معدن و متالورژی - بخش متالورژی صنعتی

1. Optimization of the structural and magnetic properties of mnfe2o4 doped by zn and dy using taguchi method

Mahmoud Shayestefar, Alireza Mashreghi, Saeed Hasani, Mohammad Taghi Rezvan (2022), Journal of magnetism and magnetic materials , 541(), 168390- (No: 25485) (10.1016/j.jmmm.2021.168390)

2. Synthesis and characterization of zinc and vanadium co-substituted cofe2o4 nanoparticles synthesized by using the sol-gel auto-combustion method

Parvin Imani pour, Saeed Hasani, Amir Seifoddini, Marcin Nabialek (2022), Nanomaterials , 12(), 752-1-752-13 (No: 26712) (10.3390/nano12050752)

3. Reobservations of recrystallization and its eeffect on mechanical and magnetic properties in a severely cold-rolled ni-based soft magnetic alloy

Azizeh Mahdavi, Alireza Mashreghi, Saeed Hasani, Mohammad Reza Kamali Ardakani (2022), Archives of metallurgy and materials , 67(2), 703-717 (No: 26805)

4. Effect of cooling rate on mechanical properties of new multicomponent fe-based amorphous alloy during annealing process

Parisa Rezaei shahreza, Hossein Redaei, Seyede parisa Mousavi, Saeed Hasani, Amir Seifoddini, B. Jez, M. Nabialek (2022), Archives of metallurgy and materials , 67(1), 251-254 (No: 26806) (10.24425/amm.2022.137498)

5. Impact of annealing treatment on the microstructural-dependent mechanical properties of a cold-rolled fe-co-10v alloy

Mohammad Reza Kamali Ardakani, Alireza Mashreghi, L.P. Karjalainen, Saeed Hasani, Vahid Javaheri, M. Seiyedbeigi, J. Komi (2021), Materials science and engineering a-structural materials properties microstructure and processing , 821(), 141595- (No: 24945) (10.1016/j.msea.2021.141595)

6. بررسي تاثير افزودنDy بر خواص ساختاري و مغناطيسي نانو ذرات فريت Mn-Zn

محمود شايسته فر, عليرضا مشرقي, سعيد حسني (1400)، استقلال، 40(1)، 65-81 (شماره: 24993)

7. Change of magnetic saturation polarisation as a function of temperature in bulk fe-based amorphous alloys

S. Garus, P. Vizureanu, M.M.A.B. Abdullah, M.F. Omarc, S. Walters, Saeed Hasani, Amir Seifoddini, Parisa Rezaei shahreza (2021), Acta physica polonica a , 139(), 510-512 (No: 25030) (10.12693/APhysPolA.139.510)

8. Magnetisation process of fe61+xco10-xy8w1b20bulk amorphous alloys

P. Sikora, M. Nabialek, K. Bloch, J. Gondro, A.V. Sandu, M.M.A.B. Abdullah, A. Kalwik, Seyede parisa Mousavi, Saeed Hasani, B. Jel (2021), Acta physica polonica a , 139(5), 582-585 (No: 25031) (10.12693/APhysPolA.139.582)

9. Copper sulfide nanostructures: ease synthesis, photocatalytic and doxorubicin anticancer drug delivery applications

Zahra Rafiee, Fatemeh Davar, Saeed Hasani, Ali Majedi, Ahmed Esmail Shalan (2021), New journal of chemistry , 45(), 22344-22353 (No: 25691) (10.1039/D1NJ04618G)

10. The effect of cu minor addition on the non-isothermal kinetic of nano-crystallites formation in fe41co7cr15mo14y2c15b6 bmg

Saeed Hasani, Parisa Rezaei shahreza, Amir Seifoddini (2021), Journal of thermal analysis and calorimetry , 143(1), 3365-3375 (No: 22860) (10.1007/s10973-020-09716-6)

11. High efficiency mechanochemical synthesis of strontium carbonate nano?powder from celestite

Nastaran Dayani, Ali AmirArjmand, Mohsen Nouri Khezrabad, Saeed Hasani (2021), International journal of applied ceramic technology , 18(1), 24-31 (No: 23067) (10.1111/ijac.13612)

12. The effect of divalent ions of zinc and strontium substitution on the structural and magnetic properties on the cobalt site in cobalt ferrite

Parvin Imani pour, Saeed Hasani, Mohammad Afshari, Shiva Sheikh, Amir Seifoddini, Khadijeh Jahanbani-Ardakani (2020), Journal of magnetism and magnetic materials , 510(), 166941- (No: 22586) (10.1016/j.jmmm.2020.166941)

13. The possibility of vanadium substitution on co lattice sites in cofe2o4 synthesized by sol-gel autocombustion method

Parvin Imani pour, Saeed Hasani, Amir Seifoddini, Atefeh Farnia, Fateme Karimabadi, Khadijeh Jahanbani-Ardakani, Fatemeh Davar (2020), Journal of sol-gel science and technology , 95(), 157-167 (No: 22675) (10.1007/s10971-020-05316-w)

14. Reobservations on ordering, precipitation and polymorphic phase transformation phenomena during annealing of a severely cold rolled magnetic fe-co-10v alloy

Mohammad Reza Kamali Ardakani, Alireza Mashreghi, L. Pentti Karjalainen, Saeed Hasani, Vahid Javaheri, Sami Saukko, Jukka Komi (2020), Materialia , 12(), 100765- (No: 22779) (10.1016/j.mtla.2020.100765)

15. سينتيك اكسيداسيون ذرات پودري منيزيم در شرايط غيرهمدما

محمد سلطاني گردفرامرزي, امير سيف الديني, سعيد حسني (1399)، مواد پيشرفته در مهندسي (استقلال)، 39(1)، 75-87 (شماره: 22859)

16. Nucleation and growth of nano-crystallites in a new multicomponent fe-based bmg during the partial crystallization process

Saeed Hasani, , Amir Seifoddini, Parisa Rezaei shahreza (2020), Journal of thermal analysis and calorimetry , (1), - (No: 22861) (10.1007/s10973-020-09718-4)

17. Influence of microstructure and texture evolution on magnetic properties attained by annealing of a cold-rolled fe-co-10v semi-hard magnetic alloy

Mohammad Reza Kamali Ardakani, Alireza Mashreghi, L.P. Karjalainen, Saeed Hasani, Vahid Javaheri, J. Komi (2020), Materials characterization , 169(), 110591- (No: 23060) (10.1016/j.matchar.2020.110591)

18. Isokinetic analysis of fe41co7cr15mo14y2c15b6 bulk metallic glass: effect of minor copper addition

Parisa Rezaei shahreza, Amir Seifoddini, Saeed Hasani, Zahra Jafari nadushan, Agata Sliwa, Marcin Nabialek (2020), Materials , 13(), 3704- (No: 23062) (10.3390/ma13173704)

19. Non-isothermal kinetic analysis of the oxidation of al-50mg powder mixture

Mohammad Soltani gerdefaramarzi, Amir Seifoddini, Saeed Hasani, Parisa Rezaei shahreza (2020), Reaction kinetics mechanisms and catalysis , 131(), 367-381 (No: 23065) (10.1007/s11144-020-01845-1)

20. Effect of cooling rate on glass forming ability of novel fe-based bulk metallic glass

Hossein Redaei, Parisa Rezaei shahreza, Amir Seifoddini, Saeed Hasani (2020), Acta physica polonica a , 138(), 265-267 (No: 23171) (10.12693/APhysPolA.138.265)

21.

Afshin Amiri moghaddam, Mehdi Kalantar, Saeed Hasani (2020), , 7(2), 917-930 (No: 23317)

22. تاثير افزودن نيكل بر ريزساختار و قابليت شيشه سازي آلياژ آمورف حجمي Fe-Mo-P-C-B

مهسا انصاري نيا, امير سيف الديني, سعيد حسني, سيدصادق قاسمي بنادكوكي (1399)، مهندسي متالورژي و مواد (دانشكده مهندسي سابق) دانشگاه فردوسي مشهد، 31(2)، 35-44 (شماره: 24107)

23. Non-isothermal kinetic analysis of oxidation of mg-0.15al alloy powder

Mehran Shafi Hosseini, Saeed Hasani (2020), , 23(77), 16-27 (No: 24363)

24. Non-isothermal kinetic analysis of high temperature oxidation of ti-6al-4v alloy

Afsane Rajabi, Alireza Mashreghi, Saeed Hasani (2020), Journal of alloys and compounds , 815(), 151948-151948 (No: 20684) (10.1016/j.jallcom.2019.151948)

25. Enhanced mechanical and magnetic properties of [(fe0.9ni0.1)77mo5p9c7.5b1.5]99.9cu0.1 bulk metallic glass by partial annealing

Zahra Jafari nadushan, Amir Seifoddini, Saeed Hasani (2019), Metallurgical and materials transactions a-physical metallurgy and materials science , 50A(), 2875-2885 (No: 20056) (10.1007/s11661-019-05195-z)

26. The oxidation mechanism of pure magnesium powder particles: a mathematical approach

Mohsen Karimpour, Sayedradman Eatezadipourmoghadm, Saeed Hasani, A. Ghaei (2019), Metallurgical and materials transactions b-process metallurgy and materials processing science , 50(), 1597-1607 (No: 20184) (10.1007/s11663-019-01588-y)

27. The effects of thioacetamide/copper molar ratio and reaction time on the phase evolution, morphology, optical, and photocatalytic properties of the nanosheets-based flower-like copper sulfide

Vahid Sabaghi, Fatemeh Davar, Ali Sadat Nabi, Saeed Hasani (2019), International journal of applied ceramic technology , 16(6), 2322-2330 (No: 20461) (10.1111/ijac.13322)

28. Effect of annealing temperature and chelating agent concentration on the phase evolution, morphology and heavy metal removal efficiency of nanosized spinel

Niloofar Karami, Fatemeh Davar, Saeed Hasani (2019), Materials research express , 6(2), 1-19 (No: 20519) (10.1088/2053-1591/ab3263)

29. The effect of simultaneous addition of ethylene glycol and agarose on the structural and magnetic properties of cofe2o4 nanoparticles prepared by the sol-gel auto-combustion method

Seyede mansoureh Hashemi, Saeed Hasani, Khadijeh Jahanbani Ardakani, Fatemeh Davar (2019), Journal of magnetism and magnetic materials , 492(), 1-9 (No: 20674) (10.1016/j.jmmm.2019.165714)

30. Reobservations of ferrite recrystallization in a cold-rolled ordered fe-50co-10v alloy using the ebsd method

Mohammad Reza Kamali Ardakani, L. Pentti Karjalainen, Alireza Mashreghi, Saeed Hasani, Vahid Javaheri, Jukka Komi (2019), Materials characterization , 158(), 109962- (No: 21074) (10.1016/j.matchar.2019.109962)

31. A novel comprehensive experimental study concerned graphene oxide nanoparticles dispersed in water: synthesise, characterisation, thermal conductivity measurement and present a new approach of rlsf neural network

W.I. Liu, Reza Malekahmadi, Seyed Amin Bagherzadeh, Majid Ghashang, Arash Karimipour, Saeed Hasani, Iskander Tlili, Marjan Goodarzi (2019), International communications in heat and mass transfer , 109(), 104333- (No: 21080) (10.1016/j.icheatmasstransfer.2019.104333)

32. Effect of cu presence on evolution of mechanical and magnetic properties in a novel fe-based bulk metallic glass during partial annealing process

Saeed Hasani, Parisa Rezaei shahreza, Amir Seifoddini (2019), Metallurgical and materials transactions a-physical metallurgy and materials science , 50(1), 63-71 (No: 18356) (10.1007/s11661-018-4976-6)

33. The effect of microstructure and texture evolution on the hardness properties of the cold rolled aa7075-t6 aluminum alloy during the friction stir processing

Farhad Harati, Morteza Shamanian, Masoud Atapour, Saeed Hasani, Jerzy A Szpunar (2019), Materials research express , 6(4), 1-9 (No: 19782) (10.1088/2053-1591/aafe48)

34. Effect of apple cider vinegar agent on the microstructure, phase evolution, and magnetic properties of cofe2o4 magnetic nanoparticles

Mohammad Afshari, Amirreza Rouhani, Saeed Hasani, Fatemeh Davar, Khadijeh Jahanbani Ardakani (2019), International journal of applied ceramic technology , 4(16), 1612-1621 (No: 20057) (10.1111/ijac.13224)

35. Enhancement of mechanical properties of a soft magnetic fe-based metallic glass

Saeed Hasani, Mahsa Ansariniya, Amir Seifoddini (2019), Materials science and technology , 35(7), 865-871 (No: 20058) (10.1080/02670836.2019.1594552)

36. Kinetic analysis of crystallization process in (fe0.9ni0.1)77mo5p9c7.5b1.5100xcux (x0.1at.) bmg

Zahra Jafari nadushan, Amir Seifoddini, Saeed Hasani, Parisa Rezaei shahreza (2018), Journal of thermal analysis and calorimetry , 134(), 1565-1574 (No: 17784) (10.1007/s10973-018-7372-y)

37. Enhanced glass forming ability mechanical and magnetic properties of fe 41 co 7 cr 15 mo 14 y 2 c 15 b 6 bulk metallic glass with minor addition of cu

Saeed Hasani, Parisa Rezaei shahreza, Amir Seifoddini, (2018), Journal of non-crystalline solids , 497(), 40-47 (No: 17786) (10.1016/j.jnoncrysol.2018.05.021)

38. (fe 0.9 ni 0.1 ) 77 mo 5 p 9 c 7.5 b 1.5 bulk metallic glass matrix composite produced by partial crystallization the non-isothermal kinetic analysis

Mahsa Ansariniya, Amir Seifoddini, Saeed Hasani (2018), Journal of alloys and compounds , 763(), 606-612 (No: 17829) (10.1016/j.jallcom.2018.05.360)

39. Effect of recrystallization and phase transitions on the mechanical properties of semihard magnetic feco-7.15v alloy during the thermomechanical process

Saeed Hasani, Morteza Shamanian, Ali Shafyei, Majid Nezakat, Hossein Mostaan, Jerzy A. Szpunar (2017), Metallurgical and materials transactions a-physical metallurgy and materials science , 48(), 1903-1909 (No: 14065) (10.1007/s11661-017-3954-8)

40. Thermal stability and crystallization process in a fe-based bulk amorphous alloy the kinetic analysis

Parisa Rezaei shahreza, Amir Seifoddini, Saeed Hasani (2017), Journal of non-crystalline solids , 471(), 286-294 (No: 15239) (10.1016/j.jnoncrysol.2017.05.044)

41. Ndyag laser micro-welding of ultra-thin fecov magnetic alloy optimization of weld strength

H. MOSTAAN, MORTEZA SHAMANIAN, Saeed Hasani, MORTEZA SAFARI, J.A. SZPUNAR (2017), Transactions of nonferrous metals society of china , 27(), 1735-1746 (No: 15601) (10.1016/S1003-6326(17)60196-1)

42. The effect of agarose content on the morphology phase evolution and magnetic properties of cofe 2 o 4 nanoparticles prepared by sol-gel auto combustion method

Amirreza Rouhani, Amir hossein Esmaeil khanian, Fatemeh Davar, Saeed Hasani (2017), International journal of applied ceramic technology , 15(), 758-765 (No: 15867) (10.1111/ijac.12832)

43. Ab-initio calculation of the gamma-surface and cleavage energy in the b2 feco intermetallic compound

Hojjat Gholizadeh, Saeed Hasani (2017), Computational materials science , 143(), 515-527 (No: 15995) (10.1016/j.commatsci.2017.11.050)

44. Microstructural and phase evolutions their dependent mechanical and magnetic properties in a fe-based amorphous alloy during annealing process

Parisa Rezaei shahreza, Amir Seifoddini, Saeed Hasani (2017), Journal of alloys and compounds , (738), 197-205 (No: 16000) (10.1016/j.jallcom.2017.12.135)

45. The effect of the order-disorder transition on the electrical magnetic and mechanical properties of vicalloy i

Saeed Hasani, Ali Shafyei, Majid Nezakat, Hossein Mostaan, Peiman Behjati, Pespendo Sahu (2017), Intermetallics , 81(), 73-79 (No: 14824) (10.1016/j.intermet.2017.02.027)

46. Non-isothermal kinetic analysis of nano-crystallization process in (fe41co7cr15mo14y2c15)94b6 amorphous alloy

Parisa Rezaei shahreza, Amir Seifoddini, Saeed Hasani (2017), Thermochimica acta , 652(), 119-125 (No: 14888) (10.1016/j.tca.2017.03.017)

47. Development of zro2-mgo nanocomposite powders by the modified sol-gel method

Fatemeh Davar, Nasrin Shayan, Akbar Hojjati-Najafabadi, Vahid Sabaghi, Saeed Hasani (2016), International journal of applied ceramic technology , 14(), 211-219 (No: 12990) (10.1111/ijac.12624)

48. Electron microscopy study on grain boundary characterizations of fe co v alloy during annealing

Saeed Hasani, M. Shamanian, A. Shafyei, P. Behjati, H. Mostaan, P. Sahu, J.A. Szpunar (2015), Vacuum , 114(), 1-5 (No: 12975) (10.1016/j.vacuum.2014.12.025)

49. Response of structural and magnetic properties of ultra-thin feco v foils to high-energy beam welding processes

Hossein Mostaan, Morteza Shamanian, Saeed Hasani, J. A. Szpunar (2015), International journal of minerals metallurgy and materials , 22(), 1190-1198 (No: 14474) (10.1007/s12613-015-1184-x)

50. Analysis and characterization of microstructural evolutions mechanical response and fracture mechanism of laser welded fe co v ultra-thin foils

H. Mostaan, M. Shamanian, S.M. Monirvaghefi, P. Behjati, Saeed Hasani, M. Fathi Moghaddam, M. Amiri, J.A. Szpunar (2015), Optics and laser technology , 68(), 211-219 (No: 14475) (10.1016/j.optlastec.2014.12.003)

51. Correlation between magnetic properties and allotropic phase transition of fe co v alloy

Saeed Hasani, Ali Shafyei, Morteza Shamanian, Peiman Behjati, Hossein Mostaan, Timu Juuti, Jerzy A. Szpunar (2015), Acta metallurgica sinica-english letters , 28(), 1055-1058 (No: 14480) (10.1007/s40195-015-0294-9)

52. Influence of annealing treatment on micro/macro-texture and texture dependent magnetic properties in cold rolled feco 7.15v alloy

Saeed Hasani, Morteza Shamanian, A. Shafyei, Peiman Behjati, Majid Nezakat, M. Fathi-Moghaddam, J.A. Szpunar (2015), Journal of magnetism and magnetic materials , 378(), 253-260 (No: 12973) (10.1016/j.jmmm.2014.11.050)

53. Non-isothermal kinetic analysis on the phase transformations of fe co v alloy

Saeed Hasani, Morteza Shamanian, Ali Shafyei, Peiman Behjati, J.A. Szpunar (2014), Thermochimica acta , 596(), 89-97 (No: 12968) (10.1016/j.tca.2014.09.020)

54. Nano/sub-micron crystallization of fe co 7.15v alloy bythermo-mechanical process to improve magnetic properties

Saeed Hasani, Morteza Shamanian, Ali Shafyei, Paiman Behjati, Jerzy A. Szpunar, Mashallah Fathi-Moghaddam (2014), Materials science and engineering b-advanced functional solid-state materials , 190(), 96-103 (No: 12970)